GOEPEL Electronics       Press Release

    Date: 28 April 2006

FOR IMMEDIATE RELEASE

SCANFLEX JTAG/Boundary Scan platform easily integrates in TAKAYA Flyying Probe Tester

GÖPEL electronicworldwide leading vendor of IEEE-Std. 1149.x compliant JTAG/Boundary Scan solutions, and ITOCHU SysTech have developed a Boundary Scan option for TAKAYA Flying Probe Testers (FPT) series 8xxx and 9xxx within the scope of an OEM agreement. The solution is based upon the integration of the CASCON GALAXY software and new SCANFLEX hardware into the flexible Flying Probe test system, involving the FPT probes.

“Combining the flexible abilities of TAKAYA Flying Probe test system with GÖPEL electronic JTAG/Boundary Scan test advantages, increases the customers’ test opportunities of both products in the market. Due to this development cooperation we’re presently able to offer a highly powerful solution.” Stefan Meissner, GÖPEL electronic’s spokesman gladly announces. “In particular, the parallel control of the Flying Probes – independent from serial TAP vectors – results in a considerable improvement in test quality as well as process handling. Each probe can be an additional virtual scan pin in all types of Boundary Scan tests without modifying projects and test programs already generated at the lab stage.”

Boris Opfer, Product Manager, ICT Sales and Technical Services for ITOCHU SysTech, adds: “Only by the long-term partnership with GÖPEL electronic was it possible to provide this innovative solution not exclusively for the new generation of TAKAYA Flying Probe systems but previous systems can also be refitted. Now existing TAKAYA users are able to upgrade their test solutions and benefit from GÖPEL electronic’s CASCON software and SCANFLEX hardware products.”

In terms of hardware, the integration is based on the high-performance SCANFLEX PCI controller models SFX/PCI1149-x with programmable TCK frequencies up to 20MHz (A type) and 50MHz (B type), respectively. The UUT connection is completed by using a SCANFLEX transceiver model SFX-TAP4/C, which provides four parallel TAPs, interposing relays and up to eight programmable interface parameters for the optimal adaptation to the UUT The UUT is connected by means of the standard interface of the Flying Scorpion. The reliable SCANFLEX TAP-Transceiver with CION™ interface enables the direct control of UUTs up to 1.5m distances. No additional signal conditioning electronics is required. The probes are parallel controlled by the recently introduced multi functional module SFX-5704. Thus, each probe can digitally measure and drive, and can be used for scanning analog voltage.

In terms of software, the complete CASCON GALAXY development and execution environment was integrated into the operating system via the user friendly CAPI interface (CASCON Application Programming Interface). Thus, all CASCON software editions can be configured per enable codes on the FPT.
The Flying Probes’ control is managed with the integrated SFX-5704 module by means of HYSCAN™ technology implemented in CASCON GALAXY. HYSCAN™ enables the synchronisation of serial JTAG/Boundary Scan test vectors with parallel test vectors through a special emulation process. The parallel vectors are linked to the physical I/O interface at run time, providing tester hardware independence. The manual or automated generation of test vectors, the debugging, and the fault diagnostic is executed by the native JTAG/Boundary Scan tools. Each Flying Probe acts as a Boundary Scan pin at the contacted net, completely transparent to the user. Special knowledge about the detailed runs is not necessary because data handling is executed automatically.
First systems incl. customer application have already been delivered in the first quarter of 2006.

ITOCHU Corporation, headquartered in Tokyo and Osaka, is one of the world-biggest universal trade companies. More than 140 years of experience in the international trade make ITOCHU a competent partner. The corporate group maintains 138 branches in 85 countries and investments in more than 650 companies, generating an annual turnover more than 70 billion Euro.
ITOCHU SysTech GmbH is a 100% subsidiary of ITOCHU Corporation, specialised in planning, sales and service of innovative production and test machines in electronics and microelectronics as well as single devices and complete systems for automation and industrial production processes. The company based in Düsseldorf/Germany covers the whole of Europe. Offices and partner companies in nearly each European country provide an optimal customer support. Additional information about ITOCHU SysTech GmbH can be found online at http://www.itochu-systech.de´

GÖPEL electronic, headquartered in Jena/Germany has been a world-class vendor of Boundary Scan/IEEE 1149.x solutions for nearly 15 years. The company employs about 110 people and maintains support and sales offices in Germany, the United States and France. For the continuous support of some thousand system installations, more than 250 additional specialists ensure local and on-site support through a worldwide service and distribution network. Additional information can be found at www.goepel.com

GÖPEL electronic GmbH   
Göschwitzer Str. 58/60   

07745 Jena/ GERMANY   

Contact: Stefan Meissner   

Tel: +49-36 41 68 96-39   

Fax: +49-36 41 68 96-44   

Email: s.meissner@goepel.com   

Internet: http://www.goepel.com   




 About UsNews | Privacy Policy | Contact Us | ©2006 GOEPEL Electronics