SCANFLEX platform
To learn more about the respective SCANFLEX components, click on the colored boxes in the diagram below:
|
||
|
SCANFLEX systems are controlled through a SCANFLEX Controller. This controller is responsible for simultaneous generation and dynamic distribution of serial patterns, parallel patterns, and control sequences, supporting three standard SFX and SFX/LS Interfaces. |
As front-end, SCANFLEX systems use TAP Transceiver modules. These modules are connected to the controller with the SFX cable (available in 1 m/3 ft, 2 m/6 ft, 5 m/16 ft lengths). TAP Transceiver modules process the data coming from the controller for the operation of its built-in and/or added-on resources. TAP signals are provided to the unit under test through interchangeable TAP Interface Cards (TIC), allowing a nearly infinite range of front-end adaptations for various signal types, signal conditioning, and integration environments, including custom specific variants. |
The third major component in a SCANFLEX system is the optional I/O Module. These I/O modules are controlled independently from any other resources in the system through the SFX/LS interface. |
Click on the colored boxes in the diagram above to learn more about the respective SCANFLEX components.
Read more about the SCANFLEX hardware platform,
or send us an E-mail inquiry.